BGK-100/100A Pump Status Meter can monitor in real time plural critical parameters of electric pump. With automatic alarming, the problem will be solved swiftly and efficiently. Taking remedial actions in time can extend the service life of lifting system, lessen well workover and reduce cost.

Six Parameters that Electric submersible pump Status tester can measure are: input pressure, output pressure, input temperature, motor temperature ,set vibration and current loss . Extracted signals are transmitted through three-phase generator cable of the motor of submersible pump, providing direct current power for down hole meters simultaneously without interference of mechanical structure and circuitry of the submersible pump.

Advantages:

• Control the frequency of variable frequency motor by monitoring of parameters such as input pressure to maximize production and recovery ratio.
• Monitor in real time plural critical parameters of electric pump. With automatic alarming, the problem will be solved swiftly and efficiently. Taking remedial actions in time can extend the service life of lifting system, lessen well workover and reduce cost.
• Provide useful materials on production and reservoir, including instant pressure buildup reservoir test, calculation of oil boundary and permeability, dynamic monitoring of inflow and trends of production.
• In time pressure measurement satisfies regular testing requirement without putting direct reading pressure meter into the downhole. Communication performs through electric power carrier, without using cable saving cost and simplifying the construction.

Parameters:

• Working temperature : -40℃～150℃
• Maximum working pressure : 8700 PSI （60MPa）
• Pressure measurement range : 0～8700 PSI（60MPa）（optional range ）
• Pressure measurement accuracy ≤1‰
• Temperature measurement accuracy: ±0.5℃
• Communication bps: 8bps
• Maximum working range: 5000V
• Motor frequency range : 8～100Hz
• OD: Φ114mm
• Transmission distance : >3000 meters