Welcome to visit TYHOO website
Construction of WEST KUWAIT Mega Complex

2019-06-26

CONTRACTOR: Ali Alghanim & sons (Electromechanical Project Division)

SERVICE: Fire Water

DESCRIPTION: Valve internal primed FBE coating

BACKGROUND:

This case study shows the solution of valve internal Primed FBE coating on Construction of West Kuwait Mega complex according to the requirement of KOC-P-005 STD, and defines the coating materials proposed in this project.
Tyhoo owns the only post-curing line pipe internal primed FBE/liquid  epoxy  coating  production  line  in  China. The internal FBE/liquid epoxy coating production line has a design capacity of 800,000 square meters per year applicable for pipe diameter ranges from 114mm to 1219mm, and coating thickness ranges from 250 to 600um (typical).
Tyhoo's pipe internal FBE coating line adopts Sucking Oven Posted-curing System with liquid  phenolic  epoxy primer (or other type of liquid primer) with fusion bonded  epoxy  coating,  with  heating  cleaning  oven  to remove any oil, grease or oxide contamination on  pipe  surface  and  continuous  long-time  high  temperature post curing to ensure the internal FBE coating’s adhesion strength, compactness, anti-heavy-corrosion ability, anti-abrasion ability and other key mechanical and chemical resistance ability.  Tyhoo’s  internal  FBE  coating system is applicable to be used for transporting drinking  water,  sea  water,  desalinated  sea  water,  sewage,  oilfield sewage, slurry and other special medium. The coating  has  much  higher  cost  performance  compared with internal rubber liner, internal high density polyethylene liner or other anti-corrosion solutions.